Forgo-Type Water-Air Heat Exchanger

C&C is specialized in R&D and production of various heat exchangers and is a high-tech production and service-type firm which has a complete system in heat exchanger design and system solution. It mainly produces relevant products, such as Transverse Finned All-Aluminum Micro-Channel Parallel Flow Heat Exchanger, Forgo Type Water-Air Heat Exchanger, Fin-Tube Heat Exchanger and Compact Air Cooler. The annual output is respectively 2 million, 8000, 1 million, 12,000.

Product classification:

Product

Tel

0086-519-68080750 / 0086-519-68080751

Email：

pd@clean-cool.com

Inquiry

Product Introduction

Model Selection (mm)

Round Tube	Φ25	Φ25	Φ28
Hole Distance	64	66.6	69.5
Row Distance	32	32.25	35
Rows	4/6	4/6	4/6
Fin Type	Single bridge	Double bridge	Double bridge
Fin Pitch	3.0—4.2	3.0—4.2	3.0—4.2
Anti-corrosion	Passivation	Passivation	Passivation
Connection of Bundles	Junction plate/gum ring	Junction plate/gum ring	Junction plate/gum ring
Max Length	9000	9000	9000

1)Forgo-type water-to-air heat exchanger

Features:

◇ Mono-metallic all aluminum plate-fin heat exchanger

◇ No bimetallic corrosion for different materials of bundles and fins

◇ Elastic connection between hose bundles and hard fin rings

◇ No degradation due to thermal expansion of metals’ connection

◇ No strengthened air-side oxide layer due to pollution

◇ No air-side corrosion

◇ No deterioration of air-side performance during product life

◇ Easier to delivery and on-site install due to its lighter design

◇ Easier to clean due to continuous fin structure

◇ Provide customer with high productivity due to install much more easily

Application	Thermal power generation, Cogeneration, Waste incineration power generation, Surface condensing air cooling system for photothermal power generation, Coagulation type air cooling system (Heller type indirect air cooling system)
Tube medium	Desalted water
Max size per bundle	≤9000mm
Surface treatment	Entirely passivation

2)Fog dispersal and defog air cooling bundle: (Fog dispersal tower)

Directly heat moist air above dew point or condensate moist air below dew point

has the advantages as follows:Corrosion resistance,High heat exchange efficiency,Less windage

Application	Heating & condensate type defog
Tube medium	Water, other process fluid
Max size	≤9000mm
Surface treatment	Entirely passivation/ adopt stainless steel tube

3)Petrochemical air - cooled bundle

Features:

High heat exchange of fin & tube,little resistance,high corrosion resistance

Application:	Heat exchange for process fluid
Tube medium	Process fluid
Max size	≤15000mm
Fin/tube connection	Wrapped fin tube
Fin &0 tube material	Stainless steel/aluminum，iron/aluminum

4)Evaporating cooling bundles (peak load cooler)

Features:

◇ Increase heat exchange capacity in the short run at thermal load peak put into operation

◇ Reduce the unit back pressure, maintain the system safe, stable and economical operation

◇ Abnormal state operation, usually used as standby application

◇ Low investment, high efficiency, high reliability, Little maintenance amount

Application	Tube fluid cooling, spray-type
Tube medium	Water & process fluid
Max size	≤15000mm
Tube material	Carbon steel tube/stainless steel tube

key word:

Design of heat exchange system/complete set of equipment overall solution